CERTIFICATIONS, DECLARATION OF PERFORMANCE & LABELS

EN STANDARDS

CE Marking applying to construction products was introduced with the Construction Product Directive in 1989. This Directive has been replaced by the Construction Product Regulation (UE) N° 305/2011 since the 1st of July 2013.
The implementation of this regulation is based on a framework of European norms which determine essential characteristics to be taken into account for a specific product in relation to a specific application. The new regulation also specifies the methods of assessment and of expression of these characteristics.
Some of these norms apply specifically to plywood products while others more generally relate to wood based panels or to any product intended for use in the construction sector without distinction. Plywood product data sheets issued by the THEBAULT GROUP are referring to these norms so as to announce their own characteristics.

CE MARKING


CE marking confirms the product conformity with the European regulations. The affixing of the CE marking is mandatory for any wood based panel intended for use in the construction. The purpose of the CE marking is to communicate the performances of the product in accordance with a list of criteria determined in EN 13986..

- Declaration Of Performance (DOP)
- CE Certificate range TEBOPLY & similar
- CE Certificate TEBOPIN Range

  • CE NS (Non structural)
    CE NS refers to panel products which are intended for use in a non-structural application. Assessment and verification of the performances in accordance with system 4.
    CE NS applies to panel products for general purpose without structural function. This marking shows that the product has been submitted to a factory test. The technical characteristics of the product are declared by the manufacturer without the intervention of a third party notified body.
  • CE 2+ or CE S (Structural)
    CE S refers to panel products which are intended for use in a structural application. Assessment and verification of the performances in accordance with system 2+.
    CE S applies to all panel products intended for use in a structural application in construction (flooring, roofing, wall-sheathing). In the case of CE S marked panel products intended for a load bearing application the communication of characteristic values to be used for the calculation in structural design is mandatory. In addition the factory production control of the manufacturer has to be certified by a third party notified body.
    All plywood products manufactured by the THEBAULT GROUP intended for use in structural applications are marked EN 636-1 S, EN 636-2 S or EN 636-3 S.
  • CE 1
    CE 1 refers to flame-retardant panel products. In addition to the requirements of system 2+, the third party notified body involved will control the fire reaction classification of the product.
    Both TEBOFLAM OKOUME and TEBOPIN FLAM are fire treated plywood panels and their fire reaction classification is shown e.g. B,s1,d0 or B,s2,d0.

- CE Certificate of compliance TEBOFLAM
- CE Certificate of compliance TEBOPIN FLAM

ECOLABELS

PEFC™ and FSC certifications guarantee that our products have been made using wood sourced from sustainably-managed forests, under ecological and economic considerations.

  • PEFC™
    Our TEBOPIN plywoods, made from Maritime Pine, are stamped with PEFC™ certification N° 10-31-663 (Qual/05-92) for our SIB THEBAULT SAS production site at Sauzé–Vaussais (79) and THEBAULT PLY–LAND SAS in Solférino (40).
    - PEFC™ chain of custody certificate (Maritime Pine)

-  Read more : THEBAULT Group’s environmental policies

QUALITY MARKS

  • Marque NF Extérieur CTB-X
    This is a quality mark awarded after a manufacturer voluntarily submits their products to controlling by an independent body. This mark confirms a product’s conformity to a specific reference system. NF Extérieur CTB-X is an AFNOR certification managed by FCBA, which carry the surveillance of the in house controls carried out by the manufacturers and certifies product performance by mean of random sampling taken in the factory and submitted to laboratory analysis.
    The NF Extérieur CTB-X mark determines the quality level of the gluing for use in exterior conditions, the selection of durable wood species for producing the plywood and the mechanical properties of the plywood.
    - Plywoods manufactured by the THEBAULT Group which qualify for this mark are either stamped on their edge or on their face with the mention NF Extérieur CTB-X 42.
    NF EXT. CTBX (F) : Quality Certificate TEBOPLY Range & Similar
    NF EXT. CTBX (F) : Quality Certificate TEBOPIN Range
  • Marque BFU 100
    The BFU 100 quality mark is based on the conditions of the German standard DIN 68705 - Part 3, the reference system of which is recommended by the authorities for use in the building sector. The logogram BFU 100 IAW DIN 68705 Part 3 mark indicates that the product conforms to the standard, which covers the wood species used, the thickness of the individual veneers, the gluing class, the grade of the outerlayers and the system of in house control applied by the manufacturer.
    Contrary to the conditions of CE marking for panels intended for use in structural applications, this certification concerns the product itself, not just the quality control system in place in the factory of production.
    - THEBAULT plywood sold under the various TEBOPIN brand names are BFU 100 certified IAW DIN 68705 Part 3, and can be identified by certificate number ÜZ- BWU03-1 14.22

2010-2019  Asteur — Groupe THEBAULT
Plan du site | | Suivre la vie du site RSS 2.0